<div dir="ltr">I ran a 'run diag extended' everything passed see output:<br><br>* Summit400-48t:8 # run diag extended<br><br>Running Extended diagnostics will reset the switch and disrupt network traffic.<br><br>Are you sure you want to continue? yes/no yes<br>
The configuration database has been changed (primary configuration is selected).<br>Do you wish to save these changes (yes, no, or cancel) yes<br>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>!.!.!System will reset in 2 seconds<br>
<br><br><br>Power On Self Test ... OK<br><br>Boot Module, Jul 19 2004 v4.9<br>=============================<br>Memory Size: 256 MB<br><br><br>Press spacebar during powercycle for boot menu<br><br>Decompressing primary image from flash to ram ....................................+.................................. .................................................................!<br>
<br><br>Starting Summit400 extended diagnostic test...<br>Start cpu diagnostic test... ... ... ... ... ... ..... ... ....PASSED<br>Start switch ASIC diagnostic test... ..... ..... .....PASSED<br><br>CPU Loopback Test Device............................................................................................. ......0(13).....1(13).....2(13).....3(13).....PASSED<br>
Port 1000BaseT MAC loopback test... ................................................................................. ...............1....................2....................3....................4....................5................. ...6....................7....................8....................9....................10....................11...... ..............12....................13....................14....................15....................16............. .......17....................18....................19....................20....................21.................... 22....................23....................24....................25....................26....................27..... ...............28....................29....................30....................31....................32............ ........33....................34....................35....................36....................37................... .38....................39....................40....................41....................42....................43.... ................44....................45....................46....................47....................48........... .........PASSED<br>
Port 10BaseT PHY loopback test... ................................................................................... .............1.....2.....3.....4.....5.....6.....7.....8.....9.....10.....11.....12.....13.....14.....15.....16.....1 7.....18.....19.....20.....21.....22.....23.....24.....25.....26.....27.....28.....29.....30.....31.....32.....33.... .34.....35.....36.....37.....38.....39.....40.....41.....42.....43.....44.....45.....46.....47.....48.....PASSED<br>
Port 100BaseT PHY loopback test... .................................................................................. ..............1.....2.....3.....4.....5.....6.....7.....8.....9.....10.....11.....12.....13.....14.....15.....16..... 17.....18.....19.....20.....21.....22.....23.....24.....25.....26.....27.....28.....29.....30.....31.....32.....33... ..34.....35.....36.....37.....38.....39.....40.....41.....42.....43.....44.....45.....46.....47.....48.....PASSED<br>
Port 1000BaseT PHY loopback test... ................................................................................. ...............1.....2.....3.....4.....5.....6.....7.....8.....9.....10.....11.....12.....13.....14.....15.....16.... .17.....18.....19.....20.....21.....22.....23.....24.....25.....26.....27.....28.....29.....30.....31.....32.....33.. ...34.....35.....36.....37.....38.....39.....40.....41.....42.....43.....44.....45.....46.....47.....48.....PASSED<br>
Internal HiGig Port Link Test Device... 0...1...2...3...PASSED<br><br><br><br>Power On Self Test ... OK<br><br>Boot Module, Jul 19 2004 v4.9<br>=============================<br>Memory Size: 256 MB<br><br><br>Press spacebar during powercycle for boot menu<br>
<br>Decompressing primary image from flash to ram ....................................+.................................. .................................................................!<br><br><br>Extremeware<br>Copyright (C) 1996-2004 Extreme Networks. All rights reserved.<br>
===============================================================<br><br>Version 7.3e.0.43 [non-ssh] by Release_Master on 09/17/04 00:46:11<br>System Serial Number: xxxxxxxx<br>Memory Size: 268435456 (256MB)!<br>login:<br><br>
RootNet08<br><br><div class="gmail_quote">On Fri, Aug 29, 2008 at 4:08 AM, Fabian <span dir="ltr"><<a href="mailto:fabian.extr@gmail.com">fabian.extr@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div link="blue" vlink="purple" lang="EN-US">
<div>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Hi,</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">You have to configure an ip@ to the MGMT VLAN (that have 1
unique port : the management outband port) :</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Configure mgmt ipaddress x.x.x.x/x</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">I would suggest to run a diag on your switch to verify that
there is nothing wrong with the hardware after the power failure.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);">Regards.</span></p>
<p><span style="font-size: 11pt; color: rgb(31, 73, 125);"> </span></p>
<div style="border-style: solid none none; border-color: rgb(181, 196, 223) -moz-use-text-color -moz-use-text-color; border-width: 1pt medium medium; padding: 3pt 0cm 0cm;">
<p><b><span style="font-size: 10pt;">From:</span></b><span style="font-size: 10pt;">
<a href="mailto:extreme-nsp-bounces@puck.nether.net" target="_blank">extreme-nsp-bounces@puck.nether.net</a>
[mailto:<a href="mailto:extreme-nsp-bounces@puck.nether.net" target="_blank">extreme-nsp-bounces@puck.nether.net</a>] <b>On Behalf Of </b>root net<br>
<b>Sent:</b> vendredi 29 août 2008 06:09<br>
<b>To:</b> <a href="mailto:extreme-nsp@puck.nether.net" target="_blank">extreme-nsp@puck.nether.net</a><br>
<b>Subject:</b> [e-nsp] Summit 400-48t Port Problems</span></p>
</div><div><div></div><div class="Wj3C7c">
<p> </p>
<div>
<p>Hello,<br>
<br>
I have checked the archives from 2003 to now and could not find this
anywhere. Here is my problem:<br>
<br>
I have a Extreme Summit 400-48t lost power for about 5-12 secs (UPS
failure/problem) but powered back on after power was restored and none of the ports
worked. I have an exact copy of this switch running as well and it fired
back up without a problem unlike this one.<br>
<br>
Here are sample logs:<br>
<br>
09/26/2007 16:11:34.23 <Erro> <EDP.ProcPDUFail> pdu received on
port 2 could not be processed, checksum error on port 2<br>
09/25/2007 11:10:18.43 <Erro> <EDP.ProcPDUFail> pdu received on
port 2 could not be processed, checksum error on port 2<br>
09/25/2007 10:20:02.55 <Erro> <EDP.ProcPDUFail> pdu received on
port 2 could not be processed, checksum error on port 2<br>
09/24/2007 23:50:41.30 <Erro> <EDP.ProcPDUFail> pdu received on
port 2 could not be processed, checksum error on port 2<br>
09/20/2007 13:43:49.85 <Erro> <EDP.ProcPDUFail<br>
<br>
BTW I wiped the config and the time is off now so ignore that.<br>
<br>
What do you think is wrong? How can I procure? I thought about reloading the
image but can not use the ports to do a tftp. Can some one explain also how to
configure the management port on the back to do this if possible. I am a
Cisco person not extreme but I am learning. <br>
<br>
Thanks in advanced!!!<br>
<br>
--RootNet08</p>
</div>
</div></div></div>
</div>
</blockquote></div><br></div>