<div dir="ltr"><div>The egress rate-limiting works fine. But the ingress commands where not accepted. Also the count term is not defined? Please suggest.</div>
<div>The XOS version is 12.2.1 (x450a)</div>
<div> </div>
<div>X450a-24t.9 # create access-list OneMbps " ; " " permit ; meter OneMpbs_ingress count OneM_out;"<br>Error: Too many arguments from "count" <br>X450a-24t.10 # create access-list OneMbps " ; " " permit ; meter OneMpbs_ingress;"<br>
Error: Meter not found <br><br><br></div>
<div class="gmail_quote">On 15 November 2010 08:36, Samit <span dir="ltr"><<a href="mailto:janasamit@wlink.com.np" target="_blank">janasamit@wlink.com.np</a>></span> wrote:<br>
<blockquote style="BORDER-LEFT: #ccc 1px solid; MARGIN: 0px 0px 0px 0.8ex; PADDING-LEFT: 1ex" class="gmail_quote">Should be possible.<br><br>this is the command for limiting egress:<br><br>###<br>config port 1 rate-limit egress 1000 Kbps<br>
###<br><br>this is the rule to limit ingress:<br><br>#####<br>create meter OneMbps_ingress<br>configure meter OneMbps_ingress committed-rate 1000 Kbps out-actions drop<br>create access-list OneMbps " ; " " permit ; meter OneMpbs_ingress<br>
count OneM_out;"<br>configure access-list add "OneMbps" first ports 1 ingress<br>#####<br><br>On 11/11/10 11:40 AM, Jake Jake wrote:<br>> Hi,<br>> Is it possible to do per-port ingress & egress rate-limiting/policing on<br>
> Extreme Summit X450?<br>><br>><br>><br>><br>> _______________________________________________<br>> extreme-nsp mailing list<br>> <a href="mailto:extreme-nsp@puck.nether.net" target="_blank">extreme-nsp@puck.nether.net</a><br>
> <a href="https://puck.nether.net/mailman/listinfo/extreme-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/extreme-nsp</a><br>_______________________________________________<br>extreme-nsp mailing list<br>
<a href="mailto:extreme-nsp@puck.nether.net" target="_blank">extreme-nsp@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/extreme-nsp" target="_blank">https://puck.nether.net/mailman/listinfo/extreme-nsp</a><br>
</blockquote></div><br></div>