[F10-nsp] New Force10 f10rancid for FTOS devices

[Greg Hankins]

Well, that was annoying.  Sorry about that, an overzealous regex was
truncating output in a couple of places.  Your serial numbers should look
better now too.

I also added a couple lines of code to whack passwords on the "ftp-server
username" and "enable restricted" commands.

New module:
http://www.twoguys.org/~gregh/software/f10rancid

Corrected example output:
E1200 - http://www.twoguys.org/~gregh/software/E1200-rancid-example
C300 - http://www.twoguys.org/~gregh/software/C300-rancid-example
S50N - http://www.twoguys.org/~gregh/software/S50N-rancid-example

Greg

-- 
Greg Hankins <ghankins at mindspring.com>

-----Original Message-----
Date: Thu, 26 Jun 2008 16:35:11 -0700
From: Sean Knox <sean at craigslist.org>
To: Greg Hankins <ghankins at mindspring.com>
CC: force10-nsp at puck.nether.net
Subject: Re: [F10-nsp] New Force10 f10rancid for FTOS devices

Greg Hankins wrote:
>A new f10rancid module that supports all Force10 devices running FTOS is
>now available.  

Hi Greg,

One little bug so far: our 48-port GigE TF cards show up as 10/100:



!Chassis: Required Type : E48TF - 48-port 10/100 Base-T line card with 
RJ-45 interfaces (EF)


core1p#show chassis  | grep E48TF
Required Type : E48TF - 48-port 10/100/1000Base-T line card with RJ-45 
interfaces (EF)

Thanks for updating f10rancid-- the extra output is useful.

cheers,
sk