[F10-nsp] Quick question from a F10 newb...

William S. Duncanson caesar at starkreality.com
Fri Nov 6 16:20:42 EST 2009


Oof, ok.  We've got some vlans that aren't contiguous, so it'll be a long
"int range ..." line. But oh well.

Thanks,


-----Original Message-----
From: Marcus Stoegbauer [mailto:marcus at grmpf.org] 
Sent: Friday, November 06, 2009 11:43 AM
To: force10-nsp at puck.nether.net
Cc: William S. Duncanson
Subject: Re: [F10-nsp] Quick question from a F10 newb...

William S. Duncanson wrote:
> What's the FTOS equivalent to Cisco's:
> Switchport trunk encapsulation dot1q
> Switchport mode trunk
> ?

You can't simply put a port into trunk mode as you do in IOS, you have
to define all the VLANs that you want to carry on that port.
For an access port you do:
int g0/6
 switchport
int vlan 123
 untagged g0/6

For a trunk port you go:
int g0/6
 switchport
int vlan 123
 tagged g0/6
int vlan 124
 tagged g0/6

and so on. You can also use "int range vlan" to cover many VLANs in one
command. (untagged and tagged relate to the way the ethernet frames are
coming into the switch)

   Marcus



More information about the force10-nsp mailing list