[f-nsp] Code Version Supported

[tcunningham at eircom.ie]

	Hello.

	Can anyone tell me what is the latest router and boot code I can
have on the Big Iron 8000

	Management Card as follows:
	HW: Chassis 8000 Router, SYSIF version 21
==========================================================================
SL 1: BxGMR4 M4 Management Module, SYSIF II (Mini GBIC), M4, ACTIVE
 8192 KB BRAM, SMC version 1, ICBM version 21
  512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA  0, version 0209
  512 KB PRAM(512K+0K) and shared CAM entries for DMA  1, version 0209
  512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA  2, version 0209
  512 KB PRAM(512K+0K) and shared CAM entries for DMA  3, version 0209

thank you..


**************************************************************** 
The information transmitted in this email is intended for the 
addressee only and may contain confidential and/or privileged 
material. Any review, retransmission,dissemination,reliance
upon or other use of, this information by persons or entities 
other than the addressee is prohibited.If you received this 
in error, please contact the sender and delete the material.
     
This message has been swept by Anti-Virus software 
****************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20030929/823aa32d/attachment.html>