[f-nsp] Problems getting OSPF running

[Dan Norton]

I have an all Cisco network and am adding a BigIron 4000 to the mix. I
have read the manual and implemented OSPF but can't get it to load the
routes from the neighbor routers.
 
It cannot actually see the routers at all and is not showing any LSAs
being received.
 
my config:
 
interface e 4/1
 ip address my.ip.add.ress 255.255.255.128
 ip ospf area 0.0.0.0
 ip ospf cost 1
!
!
!
!
router ospf
 area 0.0.0.0
 
 
Am I missing something obvious here? When I do a show ip ospf neighbors
it has nothing and a show ip ospf routes only shows the locally assigned
subnet.
 
Thanks.


 

Dan Norton


 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20040409/3c7c1862/attachment.html>