[f-nsp] update source

[Thomas Braun]

Hi,

>The command is overloaded with the snmp-server trap-source command.
>
>Use this:
>
>snmp-server trap-source <interface>
>  
>
Thank you, i will try it.


cu thomas

>-Alex
>
>
>On Dec 16, 2005, at 5:08 AM, Thomas Braun wrote:
>
>  
>
>>Hi,
>>
>>i haven't found a command to tell the foundry which update source it
>>should use if it sends syslog messages.
>>
>>Is there no command to configure the update source?
>>
>>I need it on a netiron 400 and i use SW Version:  09.1.03dT53
>>
>>thanks thomas
>>
>>_______________________________________________
>>foundry-nsp mailing list
>>foundry-nsp at puck.nether.net
>>http://puck.nether.net/mailman/listinfo/foundry-nsp
>>    
>>
>
>
>  
>


-- 
Thomas Braun                  WESTEND GmbH  |  Internet-Business-Provider
Technik                       CISCO Systems Partner - Authorized Reseller
                              Lütticher Straße 10      Tel 0241/701333-17
tb at westend.com                D-52064 Aachen              Fax 0241/911879