[f-nsp] BigIron/NetIron?

[Peter Clark]

Both do take the same cards, except for the management modules.  I
recall that you can't run a BigIron M3 in the NetIron.  The NetIron has
a faster processor and more memory, which was intended to handle more
BGP peers.

BigIron

Active management module:
  400 MHz Power PC processor 740 (version 8/8202) 66 MHz bus
  512 KB boot flash memory
 8192 KB code flash memory                                        
  256 KB SRAM
  128 MB DRAM

NetIron

Active management module:
  466 MHz Power PC processor 750 (version 8/8300) 66 MHz bus
  512 KB boot flash memory
 8192 KB code flash memory
  256 KB SRAM
  512 MB DRAM 

-----Original Message-----
From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Glenn Tan
Sent: Tuesday, May 10, 2005 12:40 PM
To: foundry-nsp at puck.nether.net
Subject: [f-nsp] BigIron/NetIron?

Hi folks

Just a couple of silly questions.

Does anyone know what the differences are between the BigIron 4000/8000
and NetIron 400/800 series? I seem to recall reading somewhere that they
both take the same cards?

And what is the difference between the M4R4G and the BxGMR4?
Only that one has 4 GBIC ports and the other has 8 mini GBIC, or am I
missing something else?

Any help that anyone can provide will be greatly appreciated.

Cheers!

Best Regards,

Glenn Tan
Senior Network Manager
Network Operations/Engineering
***********************************
Intermedia Network Services Pte Ltd
Tel: +65 98207885
Fax: +65 65470933
http://www.intermedia.com.sg
***********************************

_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp