[f-nsp] Updating running config via tftp/snmp

[Michael Renner]

Cliff Fogle wrote:
> Just making sure...You have a 'no access-list <blah>' at the top and the last line of the acl is 'end'? 

I didn't have the "end" in there, tested it now but that doesn't work 
either.

I attached a sample acl in case there's something in there which I just 
missed.

The SNMP query should be correct too, this is the stuff that gets 
sent/received:

We throw all the needed data (tftp-server-ip, filename, command) in a 
packet:
19:23:39.983246 IP 1.2.3.136.49798 > 1.2.3.130.161:  C=community 
SetRequest(81)  .1.3.6.1.4.1.1991.1.1.2.1.5.0=1.2.3.136 
.1.3.6.1.4.1.1991.1.1.2.1.8.0="acl.txt" .1.3.6.1.4.1.1991.1.1.2.1.9.0=23

The foundry responds:
19:23:39.983796 IP 1.2.3.130.161 > 1.2.3.136.49798:  C=community 
GetResponse(81)  .1.3.6.1.4.1.1991.1.1.2.1.5.0=1.2.3.136 
.1.3.6.1.4.1.1991.1.1.2.1.8.0="acl.txt" .1.3.6.1.4.1.1991.1.1.2.1.9.0=23

The status code of the save command gets queried:
19:23:40.990643 IP 1.2.3.136.49798 > 1.2.3.130.161:  C=community 
GetRequest(31)  .1.3.6.1.4.1.1991.1.1.2.1.9.0

And the foundry says that everything's fine:
19:23:40.991072 IP 1.2.3.130.161 > 1.2.3.136.49798:  C=community 
GetResponse(32)  .1.3.6.1.4.1.1991.1.1.2.1.9.0=1


best regards,
michael
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: acl.txt
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20051115/f6fe7d76/attachment.txt>