[f-nsp] Multiple Ips per VE Int(Server Iron XL)?

[Shahin Torpis]

conf t
int ve 2
ip add x.x.x.x y.y.y.y

if you do 'sh run int ve z', you'll see both ips there listed.  the
secondary command is only used if you want the ve to assume two ips in
the same subnet.

shahin

On 9/15/05, Gerald Krause <gk at ax.tc> wrote:
> Am Donnerstag, 15. September 2005 08:53 schrieb Michael Bellears:
> > Got a situation where the subnet assigned to a VE Int is no longer large
> > enough to accommodate our SSL requirements (One IP per SSL Cert) - The
> > current Subnet cannot be expanded, so I was hoping it was possible to
> > assign a "secondary" IP to the VE Int, and then run those additional
> > IP's on the servers....as my only other solution would be to replace
> > existing sub with a larger one....but that would require dns changes
> > etc.
> >
> > It doesn't look like I can, but Server Irons are renowned to have
> > "hidden" commands!
> >
> > telnet at dfx-si(config)#in ve 2
> > telnet at dfx-si(config-vif-2)#ip ad
> >   A.B.C.D   IP address
> 
> 'ip address x.x.x.x/xx secondary' ?
> 
> 
>  --Gerald (is shooting in the dark ;-)
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>