[f-nsp] Foundry EIF2402CF and Cisco 3550
Brendan Mannella
bmannella at g3tech.net
Sun Jan 1 23:02:31 EST 2006
Hello,
I currently have a Cisco 3550 setup routing vlans and everything is great
with that and the Cisco 2950's.
So I just got in a EIF2402CF to test and cannot get it to work. I cannot
ping the default gateway (on 3550) setup for the subnet I am testing. The
vlan/subnet I am testing with is Vlan 2.
Here is what I have for a config.
Cisco 3550
-------------------------
interface FastEthernet0/11
description Uplink to EIF2402CF-1
switchport trunk encapsulation dot1q
switchport mode trunk
interface Vlan2
description APC-Reboot-VLAN
ip address 204.16.245.65 255.255.255.224 secondary
ip address 208.10.143.161 255.255.255.224
dist0-1.pitbpa#sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/11 on 802.1q trunking 1
Fa0/23 on 802.1q trunking 1
Fa0/24 on 802.1q trunking 1
Port Vlans allowed on trunk
Fa0/11 1-4094
Fa0/23 1-4094
Fa0/24 1-4094
Port Vlans allowed and active in management domain
Fa0/11 1-22
Fa0/23 1-22
Fa0/24 1-22
Port Vlans in spanning tree forwarding state and not pruned
Fa0/11 1-22
Fa0/23 1-22
Fa0/24 1-22
----------------------------------------------------------------------------
-----------------------
EIF2402CF Config:
vlan 2 name remote-reboot
tagged ethernet 1/23 to 1/25
interface ethernet 1/23
description rrp3-1
interface ethernet 1/25
switchport mode trunk
Please let me know if there is any other config you need.
Everything looks fine to me, but when plugged into port 23 on the EIF and
trying to ping the default gateway for vlan 2 on the 3550, I get nothing.
Any ideas?
Thanks,
Brendan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20060101/a1f74c6a/attachment.html
More information about the foundry-nsp
mailing list