[f-nsp] ip mtu

[Rickhard Carlswärd]

Will only affect the mtu on the data flowing through the device.
I've had a chat with foundry and at the moment the MLX do not support
higher mtu on the traffic that originate from the device itself, but on
traffic that's being switched/routed trough it will handle a big mtu.

/rickhard

On Tue, 2006-07-18 at 12:50 +0200, Gunther Stammwitz wrote:
> Change/Increase the MTU for the real interface, this should work. 
> 
> Gunther
> 
> > -----Ursprüngliche Nachricht-----
> > Von: foundry-nsp-bounces at puck.nether.net 
> > [mailto:foundry-nsp-bounces at puck.nether.net] Im Auftrag von 
> > Rickhard Carlswärd
> > Gesendet: Mittwoch, 12. Juli 2006 09:48
> > An: foundry-nsp at puck.nether.net
> > Betreff: [f-nsp] ip mtu
> > 
> > Hello all,
> >         
> > I'm in the process of replacing a RX-4 with a MLX-4 but I 
> > just discovered that I can't change the MTU on the vif in the MLX.
> >         
> > On the RX-4 I just have:
> >         
> >  interface ve 116
> >  ip address xxx.xxx.xxx.xx/24
> >  ip mtu 4470
> >         
> > But on the MLX im not able to set the MTU over 1500.
> > So do anyone have any idea how I can change the MTU for a vif 
> > in the MLX?
> >         
> > /rickhard
> > 
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
> > 
> > 
> 
> 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp