[f-nsp] Foundry 09.5.02eTD2 and SSH

[John G.]

hello!

we also have this issue if i understand u correctly.  do u mean your SSH
sessions to servers that are NAT'ed through the Foundy's have their SSH
Session timeout in like some small amount of time like 5 minutes?  if so,
yes.  we also have this issue.  it is kind of a pain (but we are used to
such things with Foundry gear...)

what we do is SSH to an "admin" type machine behind our firewall that does
not go thru the firewall DMZ and then bounce to our web servers from behind
the firewall...

on another note... do your WSM modules crash from time to time?  isn't that
nice???  we fail over statefully to our secondary GTC but i mean come on...
this shouldn't happen in this kind of gear.

u can see the WSM uptime (different from whole box time shown via "sh ver")
by this:

SSH at Primary#sh wsm-state
==================================================
WSM MODULE (1) App CPU    0 MB SHM, 1 Application Processors
        CPU 1 in state of WSM_STATE_RUNNING
---------------
Module 1 App CPU 1, SW: Version 09.5.02dTF2
Compiled on Jun 08 2007 at 22:04:37 labeled as WXB09502d
DRAM 536M, BRAM 1048K, FPGA Version 0051
Code Flash 4M: Primary (1646527 bytes, 09.4.00vTF2),
               Secondary (1786586 bytes, 09.5.02dTF2)
Boot Flash 524K, Boot Version 09.05.02
The system uptime is 4 day 22 hour 2 minute 38 second
General Status: 0 ipc msg rec, 2 ipc msg sent
SSH at Primary#

we are running this code on our GTC's:

SSH at Primary#sh ver
  SW: Version 09.5.02dTD4 Copyright (c) 1996-2003 Foundry Networks, Inc.
      Compiled on Jun 08 2007 at 23:43:33 labeled as WXR09502d
  HW: ServerIronGT C-Series Router, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE
      Serial #:   CH21071698
    0 MB SHM, 1 Application Processors
16384 KB BRAM, SMC version 5, BM version 21
  SW: (1)09.5.02dTF2
==========================================================================
SL 2: J-BxG2 JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)
      Serial #:   CH21071051
 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
32768 KB PRAM and 2M-Bit*1 CAM for IGC  4, version 0449
==========================================================================
Active management module:
  1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  512 KB SRAM
  512 MB DRAM
The system uptime is 87 days 21 hours 9 minutes 53 seconds
The system started at 14:17:27 Pacific Thu Sep 06 2007

The system : started=warm start   reloaded=by "reload"

SSH at Primary#

On Dec 1, 2007 4:40 PM, kvanden <kenv68bug at yahoo.com> wrote:

> Has anybody found a resolution to the ssh timeout issue with Foundry load
> balancer running SW 09.5.02eTD2.
>
> Ken
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20071203/0e6999e7/attachment.html>