[f-nsp] RX recursive routing

[Umar Ahmed]

Hi all,
 
Has anyone got recursive routing working on the RX ?
 
I am pointing a static route to an ospf learnt route which is reachable
from my RX. I can ping the next-hop however the router does not install
the static until the vlan for the next-hop is tagged on the rx. I
thought normal recursive behaviour was to install a route if its
reachable in the rib ???? Anyone seen this ?
 

regards,

 

Umar Ahmed



**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX

Please consider the environment before printing this e-mail
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20070723/f6a20bc1/attachment.html>