[f-nsp] sFlow on XMR

[Morten Isaksen]

Hi!

I answer my own question.

sFlow is only sampling incomming traffic and I had only enabled sFlow
on the uplink port. As soon as I enabled sFlow on the other port it
worked.

/Morten

On 6/7/07, Morten Isaksen <misak at misak.dk> wrote:
> Hi!
>
> I am testing sFlow on a XMR that acts as a BGP router.
>
> The basic part is working. I receive extendedType SWITCH and
> extendedType ROUTER information, but I do not receive extendedType
> GATEWAY information and since I am interested in the AS path this is
> bad.
>
> Do you have to do something special to get this information? The
> manual states that the switch sends this information when BGP is
> enabled.
>
> The firmware is 3.2.1c
>
> --
> Morten Isaksen
> http://www.misak.dk/blog/
>


-- 
Morten Isaksen
http://www.misak.dk/blog/