[f-nsp] MLX-16 LP cards revert to CARD_STATE_REBOOT

[Peter Olsen]

Have seens something similar with 'illigal' combination of LC sw and
Mgmt SW 

I managed to get the LC up y connecting to the LC with Rconsole and
booting the LC



br,
Peter


-----Original Message-----
From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Ronald Esveld
Sent: 28. november 2007 09:59
To: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] MLX-16 LP cards revert to CARD_STATE_REBOOT

Try sending us a sh ver or a sh flash and a show module so we can see
what cards are in and whch software is on there 


Best regards,
    
Ronald Esveld
 

-----Oorspronkelijk bericht-----
Van: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] Namens goverton at nwi.net
Verzonden: woensdag 28 november 2007 00:12
Aan: foundry-nsp at puck.nether.net
Onderwerp: [f-nsp] MLX-16 LP cards revert to CARD_STATE_REBOOT

I'm new to foundry products and needing some help. I have 6 MLX-16
routers running 3.6.0bT163 and for some reason the LP cards go into
CARD_STATE_REBOOT state. I tried doing to "power-off lp 16" and then
"power-on lp 16" but the can never comes back. I have to reboot the
whole router or manually unplug the card and reinserted it for it to
start to work. The it will work for a while and error out again.


GB Overton

_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp