[f-nsp] MLX-16 LP cards revert to CARD_STATE_REBOOT

[Niels Bakker]

* goverton at nwi.net (goverton at nwi.net) [Wed 28 Nov 2007, 00:12 CET]:
>I'm new to foundry products and needing some help. I have 6 MLX-16 
>routers running 3.6.0bT163 and for some reason the LP cards go into 
>CARD_STATE_REBOOT state. I tried doing to "power-off lp 16" and then 
>"power-on lp 16" but the can never comes back. I have to reboot the 
>whole router or manually unplug the card and reinserted it for it to 
>start to work. The it will work for a while and error out again.

You don't state what linecards you have.  I have never seen that 
behaviour, though.  It could be hardware, but it could also be 
interesting to see what happens on the linecard's console; try "rcon 16" 
to find out.


	-- Niels.

--