[f-nsp] MLX full BGP route problem

[Mark Tech]

Hi all
  Thanks for that. I have just tested it and I can now see that all routes are installed on the card by increasing to 256000
   
  # sh ip network
Total IP and IPVPN Cache Entry Usage on LPs:
 Module        Host    Network       Free      Total
      1          10     225374      30616     256000
   
  My question now is; are there any reasons now not to increase system-max ip-route and system-max ip-cache to 524288 and alter the cam-partition profile to ipv4 as all this box will ever do is push ipv4 routes and receive multiple full BGP internet routes. This is to avoid any reloads in the near future. 
   
  It will never be used for ipv6, vpvn4 etc
   
  Your thoughts are appreciated
   
  Regards
   
  Mark

Andre Dubreuil <adubreuil at foundrynet.com> wrote:
        v\:* {behavior:url(#default#VML);}  o\:* {behavior:url(#default#VML);}  w\:* {behavior:url(#default#VML);}  .shape {behavior:url(#default#VML);}                 
  Also check your Cam Partition Profile to see if you need to change it.
   
   
   
      From: foundry-nsp-bounces at puck.nether.net [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Asoka De Saram
Sent: Wednesday, September 05, 2007 7:05 PM
To: Mark Tech; foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] MLX full BGP route problem


   
      Mark,
You will have to increase the default ip-route hardware entry table, and as well as the ip cache table. Here are the commands.

telnet at NetIron MLX-16 Router(config)# system-max ip-route 256000 
telnet at NetIron MLX-16 Router(config)#system-max ip-cache 256000 

the 256000 value is just a sensible value based on the current internet routing table size (~225k).

A reload is required.



    ----- Original Message ----
From: Mark Tech <techconfig at yahoo.com>
To: foundry-nsp at puck.nether.net
Sent: Wednesday, September 5, 2007 10:53:19 AM
Subject: [f-nsp] MLX full BGP route problem
            I have just installed  an MLX and connected it to my existing internet Cisco routers. The MLX is reciving full BGP routes and they are seen in the BGP table however I am seeing this in the log

     

    Sep  5 18:47:30:I:Warning: MODULE 1 - No free cache entry for new route
Sep  5 18:46:29:I:Warning: MODULE 1 - No free cache entry for new route
Sep  5 18:46:21:I:Warning: MODULE 1 - cannot allocate free cache entry

     

    sh ip network
Total IP and IPVPN Cache Entry Usage on LPs:
 Module        Host    Network       Free      Total
      1          10     102390          0     102400

    
sh ip cache
Total IP and IPVPN Cache Entry Usage on LPs:
 Module        Host    Network       Free      Total
      1          10     102390          0     102400

         

    Hence all internet routes are not being installed on  to the card, how can the ip cache be increased?

    Or have I missed something

     

    Regards

     

    Mark

    
---------------------------------
  
  Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool. 

   


   
    
---------------------------------
  
  Need a vacation? Get great deals to amazing places on Yahoo! Travel. 



       
---------------------------------
Choose the right car based on your needs.  Check out Yahoo! Autos new Car Finder tool.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20070907/dc6482a1/attachment.html>