[f-nsp] FWS4802(PREM) and AC/DC

[Ryan Harden]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

We have several MLX-4/XMR-4 that have interchangeable Power Supplies,
several are AC several are DC. The MLX/XMR are definitely swappable.
In fact I had an MLX-4 running with both an AC and a DC PSU installed
just to see if it would complain. (haven't tested whether it would run
with both powered on)

Can't vouch for the RX or 8 or 16 slot MLX/XMR as we don't have any,
though I would assume the 8 and 16 are the same as the 4.

Perhaps you're thinking of the SuperX family where the PSU slides in the
front and the connectors are fixed on the back?

/Ryan

Niels Bakker wrote:
> * mkallen at gmail.com (Mike Allen) [Tue 25 Sep 2007, 01:41 CEST]:
>> AC or DC power supplies are interchangeable within the family for pretty 
>> much all Foundry gear.
> 
> Notable exception: RX/MLX/XMR-4/8/16 chassis as those have fixed power 
> connectors on the back of the chassis.
> 
> 
> 	-- Niels.
> 

- --
Ryan M. Harden, BS, KC9IHX		Office: 217-265-5192
CITES - Network Engineering		Cell:  	630-363-0365
2130 Digital Computer Lab,		Fax:    217-244-7089
1304 W. Springfield	 		email:  hardenrm at uiuc.edu
Urbana, IL  61801 			

	 University of Illinois - Urbana/Champaign
                     -  All your Base -
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.3 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFG+cGytuPckBBbXboRAimxAJ9YzG0DkR3hqClDY4MXe9fLLxQgAwCgwOVd
eF0Of9e/D9WQDnqP8PzcTWo=
=l7Bu
-----END PGP SIGNATURE-----