[f-nsp] BGP between XMRs (or from XMR to Juniper)

[Morten Isaksen]

I think you need to specify a "network 1.2.3.0/24" to tell the XMR
which network(s) to advertise. By default it only advertises route
redistributed from OSPF, ISIS, RIP or connected routes.

What firmware version is it running?

On Thu, Apr 3, 2008 at 9:52 PM, Gerald Krause <gk at ax.tc> wrote:
> Hi David,
>
> I'am not sure regarding the default setting of a XMR but maybe you
> need a explicit "activate" under every address-family you want to use:
>
> David Ball schrieb:
> > router bgp
> >  local-as 64555
> >  neighbor 172.16.0.5 remote-as 64555
> >  neighbor 172.16.0.5 next-hop-self
> >
> >  address-family ipv4 unicast
>     neighbor 172.16.0.5 activate
> >  exit-address-family
>
> Cheers,
> --
> Gerald   (ax/tc)
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>



-- 
Morten Isaksen
http://www.misak.dk/blog/