[f-nsp] J-BXGMR4

[Valeri A Streltsov]

Hi

I've tried version 08.0.01kT53 (HP) and 07.8.01T53 (Foundry) - same results.

Ports are SFP, Tagged vlans.

Rebooted a lot of times - no effect.

Valeri

-----Original Message-----
From: Ryan Harden [mailto:hardenrm at uiuc.edu] 
Sent: Friday, April 18, 2008 9:24 PM
To: Valeri A Streltsov
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] J-BXGMR4

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Version of code?
Type of Ports?
Have you rebooted?

/Ryan

Valeri A Streltsov wrote:
> Hi
> 
> I've tried to configure PBR on J-BXGMR4 but seems to be it ignoring this
> configuration.
> 
> I need to change next-hop for incoming traffic from some interfaces with
> dependence on source IP (like some IP blocks should have next-hop 1.1.1.1,
> another one shouold have next-hop 2.2.2.2)
> 
> On BXGMR4 (not JetCore) it works but causes very high CPU load, on
J-BXGMR4
> no effect - traffic goes to default gateway configured on router.
> 
> Any ideas?
> 
> Valeri Streltsov
> TiERA Broadband Operator
> http://www.tiera.ru
> Tel. +7 812 6111116
> Fax +7 812 6010699
> 
> 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp

- --
Ryan M. Harden, BS, KC9IHX		Office: 217-265-5192
CITES - Network Engineering		Cell:  	630-363-0365
2130 Digital Computer Lab		Fax:    217-244-7089
1304 W. Springfield	 		email:  hardenrm at uiuc.edu
Urbana, IL  61801 			

	 University of Illinois at Urbana/Champaign
		University of Illinois - ICCN
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)

iD8DBQFICNkXtuPckBBbXboRAsiQAJ9LHOaGEQSGCkQaWrfK3P2teA/pBwCgsv7T
r4rqyR0gqegyR6b8c1slDLY=
=vozD
-----END PGP SIGNATURE-----