[f-nsp] J-BXGMR4

[Valeri A Streltsov]

Hi

I have two modules on two different chassis:

One:
SL 1: J4885A EP 8 port mini-GBIC Management Module, SYSIF 2 (Mini GBIC), M4,
ACTIVE
      Serial #:   CH24035634
 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC  1, version 0449

Another one:
SL 1: J4885A EP 8 port mini-GBIC Management Module, SYSIF 2 (Mini GBIC), M4,
ACTIVE
      Serial #:   CH24035580
 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC  1, version 0449


Seems they are from one part (serial numbers so near between each other)
How can I check is it hardware bug or maybe my configuration is wrong?

Maybe somebody can send me a piece of configuration code where PBR is used
for next-hop change?

Valeri

-----Original Message-----
From: Gunther Stammwitz [mailto:gstammw at gmx.net] 
Sent: Saturday, April 19, 2008 2:06 PM
To: 'Valeri A Streltsov'; foundry-nsp at puck.nether.net
Subject: AW: [f-nsp] J-BXGMR4

There were some jetcore modules out there that had a hardware bug that made
it impossible to use pbr.
We had to rma one of those once...

Regards,
Gunther
 

> -----Ursprüngliche Nachricht-----
> Von: foundry-nsp-bounces at puck.nether.net 
> [mailto:foundry-nsp-bounces at puck.nether.net] Im Auftrag von 
> Valeri A Streltsov
> Gesendet: Samstag, 19. April 2008 10:40
> An: foundry-nsp at puck.nether.net
> Betreff: Re: [f-nsp] J-BXGMR4
> 
> Hi
> 
> I've tried version 08.0.01kT53 (HP) and 07.8.01T53 (Foundry) 
> - same results.
> 
> Ports are SFP, Tagged vlans.
> 
> Rebooted a lot of times - no effect.
> 
> Valeri