[f-nsp] B8GC boards

[Mauro Magrassi]

Ooops...solved.

1. the boards were tested with older releases than 8.0.0. I rerun the 
tests with 8.0.0 and it works fine.

2. these ports are 1G *only* don't test 'em with 10/100 devices...;)


thanks a lot and take care

mm

Mike Hughes ha scritto:
> --On 21 April 2008 10:11 +0200 Mauro Magrassi <mauro at mix-it.net> wrote:
> 
>> the board seems to be ok, but we cannot make any port on the board work.
>> No signs of life out of loopback tests or other switch or routers 
>> connections.
> 
> Have you tried the card in more than one chassis, or other cards in the
> same slot in the same chassis?
> 
> That should give you an idea if it's the slot/chassis or the card.
> 
> Mike

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.