[f-nsp] Hardware PBR on J-BXGMR4

[Valeri A Streltsov]

Hi

Tried to make hardware PBR on J-BXGMR4 but seems to be in processes it in
software.

I have several ve interfaces and need to change default-gw for them to
another one (possible gateways is three at now).

It looks like:

int ve 10
 ip policy route-map alltogw1

int ve 17
 ip policy route-map alltogw2

ip access-list standard
 permit any

route-map alltogw1
 match ip address 1
 set ip default next-hop a.b.c.d

route-map alltogw2
 match ip address 2
 set ip default next-hop g.h.j.k

Each of ve interfaces have about 500-700Mbps of bandwidth, but only about
100-150Mbps of them will look for default gw. 
I use "default" in route-map to override only default gw. Statically
0.0.0.0/0 is removed from configuration, because without removing command
"set ip default next-hop" isn't working (seems to be route-map can't
override static default gw).

Any ideas?

Using 08.0.01qT53 firmware from Foundry Networks.

Valeri Streltsov
TiERA Broadband Operator
http://www.tiera.ru
Tel. +7 812 6111116
Fax +7 812 6220272