[f-nsp] FastIron RIP and OSPF

[Jared Valentine]

Yes. For SuperX prem upgrade you get full rip, ospf, bgp, and  
multicast routing.


On Sep 7, 2008, at 9:43 AM, "Lazuardi Nasution"  
<mrxlazuardin at gmail.com> wrote:

> Very complete explanation. But, is it happen too for chassis based
> FastIron like SuperX ?
>
> On Sun, Sep 7, 2008 at 3:27 PM, Mohamed Tawfik <mtawfik at salec.com>  
> wrote:
>> With full Layer 3 you can get full RIP v1 and v2 advertisement and  
>> route
>> learning, and full OSPF.
>>
>> In base layer 3 with RIP support you can advertise direct connected
>> subnets and learn the default route only.
>>
>>
>>
>> Best Regards,
>> --------------------------------------------
>> Mohamed Tawfik
>> Engineering Manager
>> Salec Egypt
>> Saudi Logistics and Electronics Company,
>> 52, Gameat el Dewal el Arabeya St. 21 st floor, Suite 152
>> Mohandessien, Giza 12311, Egypt
>> Tel   : +202 3749-3518
>> Fax   : +202 3749-3517
>> Mobile: +2010 6070 999
>> E-mail: mtawfik at salec.com
>> URL   : http://www.salec.com
>>
>> --------------------------------------------
>>
>>
>>
>>
>>
>> D I S C L A I M E R This electronic mail communication and any
>> attachments are confidential and intended only for the individual,
>> individuals or entity named above, or others specifically  
>> authorized to
>> receive it. If you are not the intended recipient, please do not  
>> read,
>> copy, use or disclose the contents of this communication to any
>> individual or entity. Kindly notify the sender that you have received
>> this communication in error by immediately replying via electronic  
>> mail.
>> Further, please delete this electronic mail communication and any  
>> copies
>> thereof without delay. Information contained herein may be subject to
>> legal professional or other privileges and may further be protected  
>> by
>> work product immunity or other legal rules. Thank you.
>>
>>
>>
>>
>> -----Original Message-----
>> From: foundry-nsp-bounces at puck.nether.net
>> [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Lazuardi
>> Nasution
>> Sent: Saturday, September 06, 2008 12:26 PM
>> To: foundry-nsp at puck.nether.net
>> Subject: [f-nsp] FastIron RIP and OSPF
>>
>> Hi,
>>
>> I found this on the FastIron Configuration Guide.
>>
>> "Layer 2 with Base Layer 3 images provide static RIP support. The
>> device does not learn RIP routes from other Layer 3 devices. However,
>> the device does advertise directly connected routes and can be
>> configured to dynamically learn default routes. Foundry Networks
>> recommends that you deploy these devices only at the edge of your
>> network, since incoming traffic can learn directly-connected routes
>> advertised by the Foundry device, but outgoing traffic to other
>> devices must use statically configured or default routes."
>>
>> Is it still happen on RIP and OSPF of FastIron with Full Layer 3  
>> images
>> ?
>>
>> Best regards,
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp