[f-nsp] UDLD Problem

[Ahmed Rezk]

I need to configure UDLD in the following setup:

 

router1         router2

|                  |

|                  |

|                  |

Brocade layer2 switch

      |

      |

      |

Brocade NetIron

 

The problem now, if I have used UDLD between the NetIron and router1 and

router2, the failure in router1 or router2 links will make the NetIron
port down.

 

So is there any method that differentiates between different routers on
the same link in the UDLD?

 

Or is there a solution that detects failure in router 1 and then drops
the route to router1 on the NetIron?

 

Best Regards,
--------------------------------------------

 Ahmed Rezk
 Systems Engineer

 Salec
 Saudi Logistics and Electronics Company,

 Mobile: +2010 2739380

 E-mail: arezk at salec.com <mailto:arezk at salec.com> 

 


--------------------------------------------

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20090406/508972fd/attachment.html>