[f-nsp] Port state blocking?

Jonathan Brashear Jonathan.Brashear at hq.speakeasy.net
Fri Feb 20 13:29:33 EST 2009


Have you tried a different port on the SIGT?   


Network Engineer, JNCIS-M
> 214-981-1954 (office) 
> 214-642-4075 (cell)
> jbrashear at hq.speakeasy.net 
http://www.speakeasy.net
-----Original Message-----
From: foundry-nsp-bounces at puck.nether.net [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Chuck Ufarley
Sent: Friday, February 20, 2009 12:24 PM
To: Seth Fiermonti
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Port state blocking?

Thanks. Looping a copper cable doesn't bring the port up, and the FESX is forwarding (see the following--ServerIron is connected via copper to the gig link, port 26):

FES2402 Switch#sho int bri

Port  Link   State     Dupl Speed Trunk Tag Priori MAC            Name
1     Down    None      None None  None  No  level0 000c.db1d.4750
2     Down    None      None None  None  No  level0 000c.db1d.4751
3     Down    None      None None  None  No  level0 000c.db1d.4752
4     Down    None      None None  None  No  level0 000c.db1d.4753
5     Down    None      None None  None  No  level0 000c.db1d.4754
6     Down    None      None None  None  No  level0 000c.db1d.4755
7     Down    None      None None  None  No  level0 000c.db1d.4756
8     Down    None      None None  None  No  level0 000c.db1d.4757
9     Down    None      None None  None  No  level0 000c.db1d.4758
10    Down    None      None None  None  No  level0 000c.db1d.4759
11    Down    None      None None  None  No  level0 000c.db1d.475a
12    Down    None      None None  None  No  level0 000c.db1d.475b
13    Down    None      None None  None  No  level0 000c.db1d.475c
14    Down    None      None None  None  No  level0 000c.db1d.475d
15    Down    None      None None  None  No  level0 000c.db1d.475e
16    Down    None      None None  None  No  level0 000c.db1d.475f
17    Down    None      None None  None  No  level0 000c.db1d.4760
18    Down    None      None None  None  No  level0 000c.db1d.4761
19    Down    None      None None  None  No  level0 000c.db1d.4762
20    Down    None      None None  None  No  level0 000c.db1d.4763
21    Down    None      None None  None  No  level0 000c.db1d.4764
22    Down    None      None None  None  No  level0 000c.db1d.4765
23    Up      Forward   Full 100M  None  No  level0 000c.db1d.4766
24    Up      Forward   Full 100M  None  No  level0 000c.db1d.4767
25    Up      Forward   Full 1G    None  No  level0 000c.db1d.4768
26    Up      Forward   Full 1G    None  No  level0 000c.db1d.4769
FES2402 Switch#

ServerIronGT E-1#sho int bri

Port  Link State     Dupl Speed Trunk Tag Priori MAC            Name
4/1   Down None      None None  None  No  level0 000c.dbb5.b660
4/2   Down None      None None  None  No  level0 000c.dbb5.b661
4/3   Down None      None None  None  No  level0 000c.dbb5.b662
4/4   Down None      None None  None  No  level0 000c.dbb5.b663
4/5   Down None      None None  None  No  level0 000c.dbb5.b664
4/6   Down None      None None  None  No  level0 000c.dbb5.b665
4/7   Down None      None None  None  No  level0 000c.dbb5.b666
4/8   Down None      None None  None  No  level0 000c.dbb5.b667
4/9   Down None      None None  None  No  level0 000c.dbb5.b668
4/10  Down None      None None  None  No  level0 000c.dbb5.b669
4/11  Down None      None None  None  No  level0 000c.dbb5.b66a
4/12  Down None      None None  None  No  level0 000c.dbb5.b66b
4/13  Down None      None None  None  No  level0 000c.dbb5.b66c
4/14  Down None      None None  None  No  level0 000c.dbb5.b66d
4/15  Down None      None None  None  No  level0 000c.dbb5.b66e
4/16  Down None      None None  None  No  level0 000c.dbb5.b66f
ServerIronGT E-1#

Thanks again


On Fri, Feb 20, 2009 at 10:10 AM, Seth Fiermonti <sfiermonti at foundrynet.com> wrote:


	From your output, you are not getting link.  Be default, all of he ports will be in a blocking state.  Look at this line:


	ServerIronGT E-1#sho int e 4/9
	GigabitEthernet4/9 is down, line protocol is down
	
	
	Loop back a copper cable on the J-B16GC...does line protocol go UP?  Also, send over an output of show interface brief for BOTH the SI and FESX.
	
	Thanks



	On 2/20/09 12:51 PM, "Chuck Ufarley" <markentime at gmail.com> wrote:
	
	

		
		This might be a silly question, but I can't get a port to come up on a ServerIron.  I enabled the interface and connected it properly to a FES-X2402 switch, but the J-B16GC and the J-B2Gx ports just won't come up and forward.  The cards have worked in other configs, but I can't get anything to come out of "blocking" mode.  Here are the shows (any help greatly appreciated):
		
		ServerIronGT E-1#sho run
		!Building configuration...
		!Current configuration : 378 bytes
		!
		ver 11.0.00TD4
		!
		module 1 bi-0-port-wsm6-management-module
		module 3 bi-jc-2-port-gig-module
		module 4 bi-jc-16-port-gig-copper-module
		!
		context default
		!
		aaa authentication web-server default local
		no enable aaa console
		telnet server
		username admin password .....
		snmp-server
		!
		interface ethernet 4/9
		 ip address 192.168.0.77 255.255.255.0
		!
		end
		
		ServerIronGT E-1#sho run
		!Building configuration...
		!Current configuration : 378 bytes
		!
		ver 11.0.00TD4
		!
		module 1 bi-0-port-wsm6-management-module
		module 3 bi-jc-2-port-gig-module
		module 4 bi-jc-16-port-gig-copper-module
		!
		context default
		!
		aaa authentication web-server default local
		no enable aaa console
		telnet server
		username admin password .....
		snmp-server
		!
		interface ethernet 4/9
		 ip address 192.168.0.77 255.255.255.0
		!
		end
		
		ServerIronGT E-1#sho mod
		    Module                                 Status    Ports Starting MAC
		S1: B0GMR WSM6 Management Module, SYSIF 2  M6, ACTIV   0
		S2:
		S3: J-BxG2 JetCore Gig Fiber Module, SYSIF OK          2   000c.dbb5.b640
		S4: J-BxGC16 JetCore Gig Copper Module, SY OK         16   000c.dbb5.b660
		ServerIronGT E-1#sho int e 4/9
		GigabitEthernet4/9 is down, line protocol is down
		  Hardware is GigabitEthernet, address is 000c.dbb5.b668 (bia 000c.dbb5.b668)
		  Configured speed auto, actual unknown, configured duplex fdx, actual unknown
		  Member of L2 VLAN ID 1, port is untagged, port state is BLOCKING
		  STP configured to ON, priority is level0, flow control enabled
		  mirror disabled, monitor disabled
		  Not member of any active trunks
		  Not member of any configured trunks
		  No port name
		
		  Internet address is 192.168.0.77/24 <http://192.168.0.77/24> , MTU 1518 bytes, encapsulation ethernet

		  300 second input rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
		  300 second output rate: 0 bits/sec, 0 packets/sec, 0.00% utilization
		  991 packets input, 77378 bytes, 0 no buffer
		  Received 581 broadcasts, 410 multicasts, 0 unicasts
		  0 input errors, 0 CRC, 0 frame, 0 ignored
		  0 runts, 0 giants, DMA received 0 packets
		  0 packets output, 0 bytes, 0 underruns
		  Transmitted 0 broadcasts, 0 multicasts, 0 unicasts
		  0 output errors, 0 collisions, DMA transmitted 0 packets
		ServerIronGT E-1#
		
		+++++
		
		Thanks much, everyone.
		
		
________________________________

		_______________________________________________
		foundry-nsp mailing list
		foundry-nsp at puck.nether.net
		http://puck.nether.net/mailman/listinfo/foundry-nsp
		

	
	
	Seth R. Fiermonti
	Sr. Systems Engineer
	7 Technology Dr
	North Chelmsford, MA
	Office: 603.397.5007
	Mobile: 781.632.6052
	www.brocade.com
	
	
	




More information about the foundry-nsp mailing list