[f-nsp] XMR force to 1000-full

[Rens]

(config-if-e1000-1/6)#speed-duplex 1000-full
Error - can't change speed and duplex mode

-----Original Message-----
From: Nuno Vieira [mailto:nuno.vieira at nfsi.pt] 
Sent: jeudi 29 janvier 2009 10:59
To: Rens
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] XMR force to 1000-full

Hi,

Can you paste the error ?

The proper way of doing that is:

interface ethernet x/y
  gig-default neg-full-auto
  speed-duplex 1000-full      <--- don't work on some versions, but the 
prior command does the proper trick.
!

regards,
--nvieira

Rens wrote:
> Hi,
> 
>  
> 
> I'm unable to change the interface of a XMR to 1000-full, I keep getting 
> an error message.
> 
>  
> 
> Is this normal? The provider of the circuit where I want to connect this 
> port says I have to force to 1000-full.
> 
>  
> 
> Regards,
> 
>  
> 
> Rens
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp