[f-nsp] debugging restarts

[Joseph Hardeman]

Hi Aaron,

Thank you for the info.  And that is my gut feeling that its the 
management card, but I have been instructed to find a "definitive" 
reason for the reboots. 

So if someone knows how I can pull any crash info from the fi and how to 
analyze it that would be great. 

Joe

Aaron Wendel wrote:
> I had this exact issue on a BI about a month ago.  It got worse and worse
> until it started rebooting every couple minutes.  No reason was ever found.
> I replaced the management card and it hasn't restarted since.
>
> Aaron
>
>
> -----Original Message-----
> From: foundry-nsp-bounces at puck.nether.net
> [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Joseph Hardeman
> Sent: Thursday, July 09, 2009 12:23 PM
> To: foundry-nsp at puck.nether.net
> Subject: [f-nsp] debugging restarts
>
> Hi Everyone,
>
> I have another fi that I found has started to restart on its own.  I am 
> getting "Warm start" in the logs that alerted me.  I did a show 
> tech-support but I did not see a reason for the restarts.  I have 
> enabled "debug all" and set "debug destination log" until I can get a 
> console cable on it and redirect to console.
>
> All power supplies and fans show ok.
>
> Any suggestions on what to check to see why the system is restarting?  I 
> am not seeing anything in the logs or sh commands that is giving me an 
> idea on what is causing the restarts.
>
> Thanks
>
> Joe
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
>
>