[f-nsp] Network configuration help request

[Vladimir Dyachenko]

Hello,

I have beginner to network and Foundry networks equipments.

I have to do the following setup. Connect a router Bigiron RX4 (port 1/1)
with a switch FastIron FGS648P (port 1F).

On the switch I am connected to two upstreams providers and I must create
two VLAN, one for each upstream.

On my switch I must do:

1. Enable L2TP (must send all in/out)
2. Create two VLAN (one per upstream)
3. Attribute the ports to the right VLAN (port 1 = VLAN1, port 2 = VLAN2)
4. Trunk them to send all traffic from/to interface 1F

On my the port 1/1 of my router I must do :

5. Enable L2TP
6. Configure the trunk

I am very lost about how to do this with Foundry equipments.

Can you please help me ?

My idea :

1. Nothing to do
2.
    SW Switch-A(config)# vlan 100 name UPSTREAM1
    SW Switch-A(config)# vlan 200 name UPSTREAM2

3.
    SW Switch-A(config)# untag ethernet 1
    SW Switch-A(config)# tag ethernet 1F
    SW Switch-A(config)# untag ethernet 2
    SW Switch-A(config)# tag ethernet 1F

4.
    SW Switch-A(config)# trunk ethernet 1/1 ethernet 2/1
    SW Switch-A(config)# write memory
    SW Switch-A(config)# trunk deploy

5. Nothing to do

6. No idea

Please let me know if I am right, I really need help me !
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20090303/5b30f54e/attachment.html>