[f-nsp] TCS/proxy oad balancing redirecting traffic on port 3128
Samit
janasamit at wlink.com.np
Fri Mar 13 04:22:43 EDT 2009
Hi,
I got basic TCS working which I found straight forward. However I want
my proxy health check to be done on port 80 (which is internally
redirected to port 3128 by proxy server) but the customer web traffic
redirection should go to port 3128. Similarly, I also need to bypass
some of my specific customers traffic going into proxy. How to achieve
this in ServerIronGT EGx2. I have this setup working in my Alteon but
not able to do it in ServerIron perhaps being a newbie in Foundry.
Thanks.
My test config:
server port 3128
tcp
server port 80
tcp
!
server cache-name squid1 192.168.0.104
no-l3-check
port 3128
port http
port http url "GET /"
server cache-group 1
cache-name squid1
ip policy 1 cache tcp http local
interface ethernet 2/1
ip-policy 1
interface ethernet 2/8
ip-policy 1
SLB-ServerIron#sh ver
SW: Version 09.4.00tTD2 Copyright (c) 1996-2003 Foundry Networks, Inc.
Compiled on Dec 06 2006 at 02:46:26 labeled as WXM09400t
(3904062 bytes) from Secondary WXM09400t.bin
HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE
Serial #: CH50050124
0 MB SHM, 1 Application Processors
16384 KB BRAM, SMC version 5, BM version 21
SW: (1)09.4.00tTF2
==========================================================================
SL 2: J-BxG JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)
Serial #: PR13021751
4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
32768 KB PRAM and 2M-Bit*1 CAM for IGC 4, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 5, version 0449
==========================================================================
Active management module:
1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus
512 KB boot flash memory
16384 KB code flash memory
512 KB SRAM
512 MB DRAM
The system uptime is 3 hours 1 minutes 47 seconds
The system : started=warm start reloaded=by "reload"
Regards,
Samit
More information about the foundry-nsp
mailing list