[f-nsp] jetcore bgp advice/info needed

[Gerald Krause]

Am 16.10.2009 21:06, Tammy A. Wisdom schrieb:
> Hi All,
> We are going to be putting in service a j-bxgmr4 (bigiron 4000) to replace a piece of aging cisco equipment.
> I am curious as to whether anyone on this list is taking a full table on that hardware (with 512MB of ram of course)?  and if you can give me an idea of the memory utilization as far as the current tables?
> feel free to email me off list.

I have only values for the older IronCore (also 512MB RAM) stuff but the
BGP memory consumption could be similar to your JetCore system.

(Software: 8.0, 2x Full eBGP Peers, 4x iBGP Peers)
NetIron1>sh mem
Total DRAM: 536813568 bytes
  Dynamic memory: 507453436 bytes total, 231146400 bytes free, 54% used
      BGP memory: 143019200 bytes (28%) used from dynamic memory
     OSPF memory: 1178840 bytes (<1%) used from dynamic memory

(Software: 9.3, 2x Full eBGP Peers, 4x iBGP Peers)
NetIron2>sh mem
Total DRAM: 536813568 bytes
  Dynamic memory: 513744892 bytes total, 216946912 bytes free, 57% used
      BGP memory: 143509280 bytes (27%) used from dynamic memory
     OSPF memory: 1098836 bytes (<1%) used from dynamic memory



--
gerald   (ax/tc)