[f-nsp] Showing Power Parameters for Export

[Frankie John-Lewis]

Morning Chuck,

 

Does the "show chassis" command meet your requirements?

 

Regards

 

Frankie

 

 

From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Chuck Ufarley
Sent: 20 April 2010 18:35
To: foundry-nsp at puck.nether.net
Subject: [f-nsp] Showing Power Parameters for Export

 

Hey all--

I'm sending some gear off to Kuwait, and have to produce a tech report
that proves conformation to foreign power specs (Mains Voltage
incorporating 240V or 415 V + Mains frequency 50 Hz).  The power
supplies are clearly marked with these specs, but I can't seem to find a
command for a BI4000 or BI8000 chassis.

Any advice?

Thanks much.

--Chuck


--------------------------------------------------------------------------------

This message is for information purposes only and is not intended as an 
offer, recommendation or solicitation to buy or sell, nor is it an official 
confirmation of terms. No representation or warranty is made that this 
information is complete or accurate. Any views or opinions expressed do not
necessarily represent those of ODL Securities Limited. This email and the 
information it contains may be confidential, proprietary or legally privileged. 
If you receive this message in error, please notify the sender and delete it
from your system. You must not, directly or indirectly, use, disclose, 
distribute, copy or store this message or any part of it if you are not the 
intended recipient. Unless otherwise stated, any pricing information given in 
this email is indicative only, is subject to changes and does not constitute 
an offer to deal at any price quoted. 

ODL Securities Limited is authorised and regulated by the Financial Services Authority.

--------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100421/1f4a6bef/attachment.html>