[f-nsp] Firmware issue

Jared Valentine hidden at xmission.com
Tue Aug 17 14:17:59 EDT 2010


My guess is you standby system will take B2S and B3L software but not B2R as well?  If that's the case then your standby system doesn't have the -PREM upgrade chip. 

Jared


On Aug 17, 2010, at 12:04 PM, 23media - Tobias Rehn <tr at 23media.eu> wrote:

> Running System:
> 
> SSH at cs1#sh version
>  SW: Version 08.0.01nT53 Copyright (c) 1996-2004 Foundry Networks, Inc.
>      Compiled on Sep 13 2007 at 11:38:29 labeled as B2P08001n
>      (4140183 bytes) from Primary B2P08001n.bin
>  HW: FastIron 800 Router, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: J-FIxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), ACTIVE
>      Serial #:   CH25023756
> 4096 KB BRAM, JetCore ASIC IGC version 47, BIA version 89
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  0, version 0447
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  1, version 0447
> ==========================================================================
> SL 2: J-FIxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), STANDBY
>      Serial #:   CH29029529
> 4096 KB BRAM, JetCore ASIC IGC version 47, BIA version 89
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  4, version 0447
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  5, version 0447
> ==========================================================================
> SL 7: J-FI48E-A JetCore Copper E Module, SYSIF 2
>      Serial #:   CH35040200
> 2048 KB BRAM, JetCore ASIC IPC version 48, BIA version 8a
> 8192 KB PRAM and 1M-Bit*1 CAM for IPC 24, version 1848
> 8192 KB PRAM and 1M-Bit*1 CAM for IPC 25, version 1848
> ==========================================================================
> Active management module:
>  466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
>  512 KB boot flash memory
> 16384 KB code flash memory
>  256 KB SRAM
>  256 MB DRAM
> Standby management module:
>  466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
>  512 KB boot flash memory
> 16384 KB code flash memory
>  256 KB SRAM
>  256 MB DRAM
> The system uptime is 72 days 15 hours 3 minutes 15 seconds
> The system started at 04:42:32 GMT+01 Sun Jun 06 2010
> 
> SSH at cs1#sh flash
> Active management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 4140183, Version 08.0.01nT53 (B2P08001n.bin)
> Compressed Sec Code size = 4149861, Version 08.0.01wT53 (B2P08001w.bin)
> Maximum Code Image Size Supported: 6815232 (0x0067fe00)
> Boot Image size = 281376, Version 07.06.05 (m2b07605.bin)
> Used Configuration Flash Size=4593, Max Configuration Flash Size=524288.
> 
> Standby management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 4140183, Version 08.0.01nT53 (B2P08001n.bin)
> Compressed Sec Code size = 4149861, Version 08.0.01wT53 (B2P08001w.bin)
> Maximum Code Image Size Supported: 6815232 (0x0067fe00)
> Boot Image Version 07.06.05 (m2b07605.bin)
> 
> 
> Spare System:
> 
> telnet at brb#sh version
>  SW: Version 08.0.01uT51 Copyright (c) 1996-2004 Foundry Networks, Inc.
>      Compiled on Oct 20 2009 at 11:49:39 labeled as B2S08001u
>      (2794156 bytes) from Primary B2S08001u.bin
>  HW: FastIron 800 Backbone, SYSIF version 21, Serial #: Non-exist
> ==========================================================================
> SL 1: J-FIxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), ACTIVE
>      Serial #:   CH31032486
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  0, version 0449
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC  1, version 0449
> ==========================================================================
> SL 5: J-FIxGMR4 JetCore Management Module, SYSIF 2 (Mini GBIC), STANDBY
>      Serial #:   CH31031442
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 89
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC 16, version 0449
> 32768 KB PRAM and 1M-Bit*1 CAM for IGC 17, version 0449
> ==========================================================================
> Active management module:
>  466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
>  512 KB boot flash memory
> 16384 KB code flash memory
>  256 KB SRAM
>  256 MB DRAM
> Standby management module:
>  466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
>  512 KB boot flash memory
> 16384 KB code flash memory
>  256 KB SRAM
>  256 MB DRAM
> The system uptime is 19 minutes 38 seconds
> 
> telnet at brb#sh flash
> Active management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 2794156, Version 08.0.01uT51 (B2S08001u.bin)
> Compressed Sec Code size = 2794156, Version 08.0.01uT51 (B2S08001u.bin)
> Maximum Code Image Size Supported: 6815232 (0x0067fe00)
> Boot Image size = 281376, Version 07.06.05 (M2B07605.bin)
> Used Configuration Flash Size=448, Max Configuration Flash Size=524288.
> 
> Standby management module:
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288
> Compressed Pri Code size = 2794156, Version 08.0.01uT51 (B2S08001u.bin)
> Compressed Sec Code size = 2794156, Version 08.0.01uT51 (B2S08001u.bin)
> Maximum Code Image Size Supported: 6815232 (0x0067fe00)
> Boot Image Version 07.06.05 (M2B07605.bin)
> 
> 
> Regards,
> Tobi
> 
> 
> Am 17.08.2010 19:55, schrieb Jared Valentine:
>> Maybe the backup system doesn't have the -PREM chips loaded, limiting this
>> unit to B2S and B3L software revisions?  What code is currently running?
>> Can you send a "show flash" and "show version"?
>> 
>> -----Original Message-----
>> From: 23media - Tobias Rehn [mailto:tr at 23media.eu] 
>> Sent: Tuesday, August 17, 2010 11:50 AM
>> To: Jared Valentine
>> Cc: foundry-nsp at puck.nether.net
>> Subject: Re: [f-nsp] Firmware issue
>> 
>> I tried the same upgrade on another system with the same specs. The
>> updates went like a charm. If i try to update my spare system with the
>> same hardware (chassis, management, etc) it fails with the following
>> error message:
>> 
>> The code type 5 and the subtype 3 are not for this HW, abort!
>> File Type check failed.
>> TFTP to Flash Error - code 8.
>> 
>> 
>> Its the same hardware... oO
>> 
>> 
>> Regards,
>> Tobi
>> 
>> 
>> Am 17.08.2010 19:45, schrieb Jared Valentine:
>>> If I remember correctly, B2P was only for NetIron and BigIron management
>>> modules . J-FIxGMR4 is "FastIron", and in the 8.0 release notes the only
>>> valid images for FastIron were B2R, B2S, or BL3 variants.  
>>> 
>>> -Jared
>>> 
>>> 
>>> 
>>> -----Original Message-----
>>> From: foundry-nsp-bounces at puck.nether.net
>>> [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of 23media - Tobias
>>> Rehn
>>> Sent: Tuesday, August 17, 2010 11:15 AM
>>> To: foundry-nsp at puck.nether.net
>>> Subject: [f-nsp] Firmware issue
>>> 
>>> 
>>> 
>>> Hello,
>>> 
>>> I have a BigIron 8000 chassis with two j-FIxGMR4 management modules. I
>>> wanted to install the latest B2P firmware (B2P08001w.bin) but the system
>>> does not accept the firmware. It says, that this firmware is not for this
>>> system!? According to my research this firmware image should fit. Has
>> anyone
>>> had such a problem?
>>> 
>>> Regards,
>>> Tobi
>>> 
>>> _______________________________________________
>>> foundry-nsp mailing list
>>> foundry-nsp at puck.nether.net
>>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>>> 
>> 
> 
> 
> -- 
> 
> 23Media GmbH
> Vennheideweg 61f
> 48165 Münster
> Germany
> 
> Tel +49 251 9879 316
> Mob +49 176 2478 6951
> Fax +49 251 3 9999 900
> 
> Geschäftsführer/CEO:
> Stefan Rehn
> Tobias Rehn
> 
> Amtsgericht Münster, HRB 12399
> USt.-ID-Nr.: DE815136232
> 
> Vertraulichkeit:
> Diese E-Mail und ihre Anlagen enthalten vertrauliche bzw. urheberrechtlich oder durch andere Rechte geschützte Informationen, die nicht öffentlich sind. Die Übermittlung ist nur an die adressierten Empfänger beabsichtigt. Wenn Sie nicht zu den beabsichtigten Empfängern gehören, löschen Sie diese E-Mail inklusive aller Anlagen. Informieren Sie uns bitte per E-Mail oder Telefon über die fehlgeleitete Zustellung. Unbeabsichtigte Empfänger dieser Mail dürfen die Inhalte und Anlagen weder kopieren noch offen legen. Die nicht autorisierte Verwendung, Verbreitung, Verteilung und Wiedergabe dieser E-Mail oder ihrer Anlagen ist nicht gestattet.
> 
> Confidentiality:
> This message and any attachment are confidential and may be privileged or otherwise protected from disclosure. If you are not the intended recipient, please return the email to the sender and delete this message and any attachment from your system. If you are not the intended recipient you must not copy this message or attachment or disclose the contents to any other person. Email messages may be monitored and/or recorded by Green Data Systems. Thank you for your co-operation. 
> 



More information about the foundry-nsp mailing list