harbor235 at gmail.com
Tue Aug 24 09:25:14 EDT 2010
I agree there is support for the relay agents but there is no DHCPV6 server,
On Tue, Aug 24, 2010 at 9:13 AM, Brashear, Jonathan <jbrashear at sbsplanet.com
> The RX series supports IPv6 relay agents for DHCP as well as IPv6 routing
> as of v2.702; the XMR/MLX series has the same as of v4.0.01. Also, most
> versions of the CER/CES series support DHCPv6(the CES 2000 series base
> package being the exception).
> Jonathan Brashear, BCNE
> Strategic Business Systems, Inc.
> 13241 Woodland Drive, 2nd Floor | Herndon, VA 20171
> Work: 214-887-7719 x 101-7719 | Cell: 214.850.5986
> Please visit our web site at www.sbsplanet.com
> -----Original Message-----
> From: foundry-nsp-bounces at puck.nether.net [mailto:
> foundry-nsp-bounces at puck.nether.net] On Behalf Of harbor235
> Sent: Monday, August 23, 2010 1:18 PM
> To: foundry-nsp at puck.nether.net
> Subject: [f-nsp] dhcpv6
> Does anyone know if any Brocade/foundry hardware supports DHCPV6?
> The applicable commands do not appear in the command line although they say
> they support it.
> Does anyone one else know of any Brocade/Foundry limitations as far as IPV6
> The information contained in this transmission may contain privileged and
> confidential information.
> It is intended only for the use of the person(s) named above. If you are
> not the intended
> recipient, you are hereby notified that any review, dissemination,
> distribution or
> duplication of this communication is strictly prohibited. If you are not
> the intended recipient,
> please contact the sender by reply email and destroy all copies of the
> original message.
> To reply to our email administrator directly, please send an email to
> postmaster at sbsplanet.com.
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the foundry-nsp