[f-nsp] How to hide crypto hashes?

Emmanuel Muncal graemann at gmail.com
Wed Aug 11 22:35:54 EDT 2010


Hi,

I have done this before. But can't seem to remember how I did it.
Anyone remember the command to hide those dsa or rsa certificates and
also the ssl certificates?

I searched the manual but in vain.

Thanks in advance.

Regards,

Eman

On 8/8/10, foundry-nsp-request at puck.nether.net
<foundry-nsp-request at puck.nether.net> wrote:
> Send foundry-nsp mailing list submissions to
> 	foundry-nsp at puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://puck.nether.net/mailman/listinfo/foundry-nsp
> or, via email, send a message with subject or body 'help' to
> 	foundry-nsp-request at puck.nether.net
>
> You can reach the person managing the list at
> 	foundry-nsp-owner at puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of foundry-nsp digest..."
>
>
> Today's Topics:
>
>    1. NI-MLX MP/LP not booting from flash (Chuck Ufarley)
>    2. Re: NI-MLX MP/LP not booting from flash (Niels Bakker)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 6 Aug 2010 09:11:36 -0700
> From: Chuck Ufarley <markentime at gmail.com>
> To: foundry-nsp at puck.nether.net
> Subject: [f-nsp] NI-MLX MP/LP not booting from flash
> Message-ID:
> 	<AANLkTikjBXWG+e-DjRgO_U5LvnTzxe10OEUCViVcZhfQ at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hey all--
>
> I'm having trouble upgrading to the late 4.1xxx code and the 5.xxx code on
> the NI-MLX.  Anyone else getting this error on attempting to reboot?
>
> NetIron MLX-4 Router#reload
> Checking for coherence...
>
> Image coherence check: Can't open startup config file.
> Warning: Image coherence check skipped due to insufficient info: MP/LP not
> booting from flash.
> Are you sure? (enter 'y' or 'n'):
>
> **********************
>
> It's odd, because if I enter the boot system flash primary command and save
> the config, the problem goes away, but I've never had to do that before.  Is
> it now a requirement to perform a coherence check before reloading?
>
> Here's the basic rundown of the box.  I hope one of you might know what I
> may be doing wrong:
>
> NetIron MLX-4 Router#sho run
> Current configuration:
> !
> ver V4.1.0dT163
> module 1 ni-mlx-20-port-1g-100fx
> !
> !
> no spanning-tree
> !
> !
> vlan 1 name DEFAULT-VLAN
> !
> !
> boot sys fl pri
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> interface management 1
>  enable
> !
> !
> !
> !
> !
> !
> !
> end
>
> NetIron MLX-4 Router#sho ver
> HW: NetIron MLX 4K Router
> Chassis (Serial #: SA08075129,  Part #: 35550-000B)
> NI-X-SF Switch Fabric Module 1 (Serial #: SA13070756,  Part #: 35548-100B)
> FE 1: Type fe200,  Version 2
> NI-X-SF Switch Fabric Module 2 (Serial #: SA13070789,  Part #: 35548-100B)
> FE 1: Type fe200,  Version 2
> ==========================================================================
> SL M2: NI-MLX-MR Management Module Active (Serial #: SA18070467, Part #:
> 35524-1
> 01C):
> Boot     : Version 3.5.0T165 Copyright (c) 1996-2009 Brocade Communications
> Syst
> ems, Inc.
> Compiled on Jul 10 2007 at 19:13:56 labeled as xmprm03500
>  (424484 bytes) from boot flash
> Monitor  : Version 4.1.0bT165 Copyright (c) 1996-2009 Brocade Communications
> Sys
> tems, Inc.
> Compiled on Feb 26 2010 at 18:33:34 labeled as xmb04100b
>  (464413 bytes) from code flash
> IronWare : Version 4.1.0dT163 Copyright (c) 1996-2009 Brocade Communications
> Sys
> tems, Inc.
> Compiled on Jul  1 2010 at 21:51:20 labeled as xmr04100d
>  (5363454 bytes) from Primary
> Board ID : 00 MBRIDGE Revision : 21
> 916 MHz Power PC processor 7447A (version 8003/0101) 166 MHz bus
> 512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3)
> 1024 MB DRAM
> Active Management uptime is 2 minutes 59 seconds
> ==========================================================================
> SL 1: NI-MLX-1Gx20-SFP 20-port 1GbE-100FX Module (Serial #: SA16070395, Part
> #:
> 35604-100B)
> Boot     : Version 3.2.1cT175 Copyright (c) 1996-2009 Brocade Communications
> Sys
> tems, Inc.
> Compiled on Feb 28 2007 at 20:04:00 labeled as xmlprm03201c
>  (334645 bytes) from boot flash
> Monitor  : Version 4.1.0bT175 Copyright (c) 1996-2009 Brocade Communications
> Sys
> tems, Inc.
> Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b
>  (422399 bytes) from code flash
> IronWare : Version 4.1.0dT177 Copyright (c) 1996-2009 Brocade Communications
> Sys
> tems, Inc.
> Compiled on Jul  1 2010 at 21:55:36 labeled as xmlp04100d
>  (3681796 bytes) from Primary
> FPGA versions:
> Valid PBIF Version = 3.14, Build Time = 12/17/2008 14:32:00
>
> Valid XPP Version = 5.22, Build Time = 8/6/2009 19:10:00
>
> BCM5695GMAC 0
> BCM5695GMAC 1
> 666 MHz MPC 8541 (version 8020/0020) 333 MHz bus
> 512 KB Boot Flash (AM29LV040B), 16 MB Code Flash (MT28F640J3)
> 512 MB DRAM, 8 KB SRAM, 286331153 Bytes BRAM
> PPCR0: 768K entries CAM, 8192K PRAM, 2048K AGE RAM
> LP Slot 1 uptime is 2 minutes 36 seconds
> ==========================================================================
> All show version done
> NetIron MLX-4 Router#sho fla
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Active Management Module (Right Slot)
> Code Flash - Type MT28F128J3, Size 32 MB
>   o IronWare Image (Primary)
>     Version 4.1.0dT163, Size 5363454 bytes, Check Sum 4eb9
>     Compiled on Jul  1 2010 at 21:51:20 labeled as xmr04100d
>   o IronWare Image (Secondary)
>     Version 3.2.1cT163, Size 7468247 bytes, Check Sum c107
>     Compiled on Feb 28 2007 at 20:00:40 labeled as xmr03201c
>   o LP Kernel Image (Monitor for LP Image Type 0)
>     Version 4.1.0bT175, Size 422399 bytes, Check Sum e57e
>     Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b
>   o LP IronWare Image (Primary for LP Image Type 0)
>     Version 4.1.0dT177, Size 3681796 bytes, Check Sum 6c67
>     Compiled on Jul  1 2010 at 21:55:36 labeled as xmlp04100d
>   o LP IronWare Image (Secondary for LP Image Type 0)
>     Version 3.2.1cT177, Size 2310700 bytes, Check Sum 4531
>     Compiled on Feb 28 2007 at 20:23:56 labeled as xmlp03201c
>   o Monitor Image
>     Version 4.1.0bT165, Size 464413 bytes, Check Sum 894a
>     Compiled on Feb 26 2010 at 18:33:34 labeled as xmb04100b
> Boot Flash - Type AM29LV040B, Size 512 KB
>   o Boot Image
>     Version 3.5.0T165, Size 424484 bytes, Check Sum b751
>     Compiled on Jul 10 2007 at 19:13:56 labeled as xmprm03500
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Line Card Slot 1
> Code Flash: Type MT28F640J3, Size 16 MB
>   o IronWare Image (Primary)
>     Version 4.1.0dT177, Size 3681796 bytes, Check Sum 6c67
>     Compiled on Jul  1 2010 at 21:55:36 labeled as xmlp04100d
>   o IronWare Image (Secondary)
>     Version 3.2.1cT177, Size 2310700 bytes, Check Sum 4531
>     Compiled on Feb 28 2007 at 20:23:56 labeled as xmlp03201c
>   o Monitor Image
>     Version 4.1.0bT175, Size 422399 bytes, Check Sum e57e
>     Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b
> Boot Flash: Type AM29LV040B, Size 512 KB
>   o Boot Image
>     Version 3.2.1cT175, Size 334645 bytes, Check Sum 510c
>     Compiled on Feb 28 2007 at 20:04:00 labeled as xmlprm03201c
> FPGA Version (Stored In Flash):
>  PBIF Version = 3.14, Build Time = 12/17/2008 14:32:00
>
>  XPP Version = 5.22, Build Time = 8/6/2009 19:10:00
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> All show flash done
> NetIron MLX-4 Router#
>
>
> Thanks everyone.
>
> --Chuck
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100806/780e19e3/attachment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 6 Aug 2010 19:12:30 +0200
> From: Niels Bakker <niels=foundry-nsp at bakker.net>
> To: foundry-nsp at puck.nether.net
> Subject: Re: [f-nsp] NI-MLX MP/LP not booting from flash
> Message-ID: <20100806171230.GP50223 at burnout.tpb.net>
> Content-Type: text/plain; charset=us-ascii; format=flowed
>
> * markentime at gmail.com (Chuck Ufarley) [Fri 06 Aug 2010, 18:58 CEST]:
>>I'm having trouble upgrading to the late 4.1xxx code and the 5.xxx
>>code on the NI-MLX.  Anyone else getting this error on attempting to
>>reboot?
>>
>>NetIron MLX-4 Router#reload
>>Checking for coherence...
>>
>>Image coherence check: Can't open startup config file. Warning:
>>Image coherence check skipped due to insufficient info: MP/LP not
>>booting from flash.
>>Are you sure? (enter 'y' or 'n'):
>>
>>**********************
>>
>>It's odd, because if I enter the boot system flash primary command
>>and save the config, the problem goes away, but I've never had to do
>>that before.  Is it now a requirement to perform a coherence check
>>before reloading?
>
> Yes, it got introduced a while ago.  I guess I wasn't the only one who
> kept forgetting to upgrade/downgrade FPGA code when inserting a new
> module or an RMA'd one into a switch and have things not work in weird
> ways.  Saving the config should be enough, though, I don't have any
> boot commands on my MLXen.  And you can actually ignore the warning if
> you want to, it's not necessarily an error, otherwise you wouldn't be
> able to do "erase startup-config"/"reload".
>
>
> 	-- Niels.
>
> --
>
>
> ------------------------------
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> End of foundry-nsp Digest, Vol 91, Issue 5
> ******************************************
>

-- 
Sent from my mobile device

Regards,

Emmanuel Muncal, ECE
http://framesofanemn.blogspot.com


-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GE d- s: a28- C++++ UL++ P L++ E--- W++
N+ o-- K- w O+ M- V-- PS+ PE+ Y PGP- t 5+
X+ R* tv+ b+ DI++ D- G e++ h---- r+++ y+++
------END GEEK CODE BLOCK------



More information about the foundry-nsp mailing list