[f-nsp] EdgeIron 4802CF: Can not get related board information

[Raoul Bhatia [IPAX]]

hi,

i have a dead/bricked/damaged/whatsever foundry edgeiron 4802cf.

c/p from the boot sequence with additional comments

> Image Loader 1.1.0.0
> Loading Diagnostic Image File : EIF4802CF_dv1012.bin 
> 
> 
> 
> 
> Diagnostics 1.0.1.2
> MAC Address             : AAAA-AAAA-AAAA
> Serial Number           : [none]
> Hardware Version        : [none]
> Manufacture Date        : [none]
> Project ID              : 60
> Board ID                : -1431655766
> Now is Normal Mode! 

the above diagnostics look very wrong ...

> --- Performing Power-On Self Tests (POST) ---
> UART Loopback Test......................PASS
> Timer Test..............................PASS
> DRAM Test ..............................PASS      
> I2C Initialization......................PASS
> Runtime Image Check ....................PASS
> PCI Device Check .......................PASS
> Switch Driver Initialization............PASS
> Switch Internal Loopback Test...........PASS
> ------------------- DONE --------------------
> 
> Shutdown switch ... Done.
> Loading Runtime Image File : EIF4802CF_v22519.bin
> Runtime 2.2.5.19

this basically looks fine.

> Can not get related board information.: errno = 0xd0003
> Assertion failed: 0, file N:/Src/Core/stkmgmt2/stktplg/stktplg_mgr.c, line 463

imho, this is the result of the invalid board id.

is there any chance that i, as a sysadmin (and non electrician ;) )
might be able to revive this unit?

thanks,
raoul
-- 
____________________________________________________________________
DI (FH) Raoul Bhatia M.Sc.          email.          r.bhatia at ipax.at
Technischer Leiter

IPAX - Aloy Bhatia Hava OG          web.          http://www.ipax.at
Barawitzkagasse 10/2/2/11           email.            office at ipax.at
1190 Wien                           tel.               +43 1 3670030
FN 277995t HG Wien                  fax.            +43 1 3670030 15
____________________________________________________________________