[f-nsp] Linecard CPU processes

[Fabio Mendes]

Hello guys,

When I need to know which process are using more CPU (the main one) I issue
a "show cpu" command which give me something like:

>sh cpu


... Usage average for all tasks in the last 1 seconds  ...
==========================================================
Name                    us/sec          %

idle                    702339          95
monitor                 9               0
wd                      72              0
flash                   0               0
dbg                     49              0
boot                    125             0
main                    0               0
itc                     0               0
tmr                     961             0
ip_rx                   3261            0
scp                     1725            0
console                 132             0
vlan                    0               0
mac_mgr                 128             0
mrp                     202             0
vsrp                    0               0
snms                    80              0
rtm                     955             0
--More--, next page: Space, next line: Return key, quit: Control-c^C

Is there a way to get the same (or at least a similar) output but regarding
the LP processes CPU usage ?

In the NI boxes I just found the "show cpu lp" command. But it doesn't list
the processes that are most using the CPU.



-- 

CCNA - Cisco Certified Network Associate
CCNP - Cisco Certified Network Professional

"A bird that you set free may be caught again, but a word that escapes your
lips will not return." Jewish Proverb
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100721/bc86f9c9/attachment.html>