[f-nsp] SSH2 Public Key Warning

[Chuck Ufarley]

Hi all--

In booting up a FESX424-PREM, I'm getting the following error:

WARNING: key# 1 must end with ---- END SSH2 PUBLIC KEY ----WARNING: Some or
all
of the keys will not be effective

I can't seem to figure out how to get rid of that key.  Can anyone take pity
on me and give me some pointers?

Thanks again.

--Chuck

Here's the show run/sho version/sho flash output:

FESX424 Router#sho run
Current configuration:
!
ver 07.0.01bT3e3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
end

FESX424 Router#sho ver
  SW: Version 07.0.01bT3e3 Copyright (c) 1996-2010 Brocade Communications
System
s, Inc.
      Compiled on Mar 17 2010 at 23:02:11 labeled as SXR07001b
      (3445615 bytes) Primary SXR07001b.bin
      BootROM: Version 05.0.00T3e5 (FEv2)
  HW: Stackable FESX424-PREM (PROM-TYPE FESX424-L3U)
==========================================================================
      Serial  #: FW34070987
      P-ASIC  0: type 00D1, rev D2  subrev 00
      P-ASIC  1: type 00D1, rev D2  subrev 00
==========================================================================
  330 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  128 MB DRAM
The system uptime is 4 minutes 29 seconds
The system : started=warm start   reloaded=by "reload"

FESX424 Router#sho fla
Compressed Pri Code size = 3445615, Version 07.0.01bT3e3 (SXR07001b.bin)
Compressed Sec Code size = 3812826, Version 04.0.01bT3e3 (SXR04001b.bin)
Compressed BootROM Code size = 524288, Version 05.0.00T3e5
Code Flash Free Space = 786432
FESX424 Rou
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100330/4fb64b65/attachment.html>