[f-nsp] NetIron MLX-4 vs Juniper MX240

[Jared Valentine]

In order to use the 8x10G modules, you need to upgrade existing MLXs  
with the high speed switch fabrics, or purchase new MLX-HSF chassis.  
You can't use them with the older fabrics.

JV


On May 13, 2010, at 10:21 AM, "George B." <georgeb at gmail.com> wrote:

> On Thu, May 13, 2010 at 9:15 AM, George B. <georgeb at gmail.com> wrote:
>>
>>
>> If you put a new 8x10G module in the old chassis you are going to be
>> limited to only 50G, I think.
>>
>> George
>>
>
> You might only need to switch out the switch fabric modules with the
> old chassis to get the higher throughput, I need to pick the brain of
> an engineer one of these days.
>
> George
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp