[f-nsp] NetIron MLX-4 vs Juniper MX240

[Ronald Esveld]

For the new hsfm you require the new hs fan exhaust to loose the warmth of the new module as well.

Ronald

verstuurd vanaf mijn mobiel / sent from my mobile phone

--- oorspronkelijk bericht ---
Van: "David Kotlerewsky" <webnetwiz at gmail.com>
Onderwp: Re: [f-nsp] NetIron MLX-4 vs Juniper MX240
Datum: 13 mei 2010
Tijd: 20:51:14

I'm going to be meeting with Brocade on Monday to discuss product roadmap,
etc. It's a meeting in their offices with product managers and engineers, so
I'm going to pick their brains backplanes, capacities, etc.

David K.

On Thu, May 13, 2010 at 9:21 AM, George B. <georgeb at gmail.com> wrote:

> On Thu, May 13, 2010 at 9:15 AM, George B. <georgeb at gmail.com> wrote:
> >
> >
> > If you put a new 8x10G module in the old chassis you are going to be
> > limited to only 50G, I think.
> >
> > George
> >
>
> You might only need to switch out the switch fabric modules with the
> old chassis to get the higher throughput, I need to pick the brain of
> an engineer one of these days.
>
> George
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100514/c52495bf/attachment.html>