[f-nsp] Example Multicast Using PIM/IGMP on MLX4 (IPTV in LAB)

[Adam E Barratt (Sales Engineering)]

Good afternoon,

I'm wondering if someone can provide a sample config for the following 
setup:

Here's the layout and it's not working... the IGMP joins don't seem to 
stick...I'm pretty sure I'm missing something simple...

vrf POST-ENCRYPT
rd: 64512:10000
ip route 0.0.0.0/0 172.16.0.3
ip multicast-routing

router pim vrf POST-ENCRYPT

vlan 600
untag eth 1/1 1/2
router-interface ve 600

vlan 601
untag eth 1/19
router-interface ve 601

int eth 1/1 = Streamer from Conklin Intracom Middleware
int eth 1/2 = Streamer from Conklin Intracom Middleware
int eth 1/19 = Test Set-top box

int ve 600
vrf forwarding POST-ENCRYPT
ip address 172.16.0.254/24
ip pim

int ve 601
vrf forwarding POST-ENCRYPT
ip address 172.26.144.1/20
ip helper-address 172.16.0.1
ip pim

Let me know which debug info would be preferable -- unless I'm missing a 
simple command.

Thanks!
Adam

-- 
Adam E Barratt
Sales Engineer
SOCKET
(573) 817-0000
abarratt at socket.net
1-800-SOCKET-3  www.socket.net
**********************************************************************
Privacy Notice: The information in this message is confidential and may be legally privileged. It is intended for use only by the individual or entity to which it is addressed. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful.  If you have received this e-mail in error please notify the sender immediately and delete it from your system without copying or forwarding.
**********************************************************************