[f-nsp] ACLs

[harbor235]

I was reading through the Netiron user guide and came across the following;


You cannot enable any of the following features on the interface if an ACL
is already applied to

that interface:

• ACL-based rate limiting

• Policy-based routing (PBR)

• VLAN ID Translation or Inner VLAN ID translation feature

IP inbound and L2 inbound ACLs are mutually exclusive on the NetIron MLX and
NetIron XMR,

but both may be bound to the same port on the NetIron CES and NetIron CER.
IP outbound and

L2 outbound ACLs are mutually exclusive on all platforms.



This is very limiting, how is everyone getting around this limitation?



harbor235 ;}
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100922/c6151144/attachment.html>