[f-nsp] Current Total Free Memory [...] is below 5 percent of Installed Memory.

[Valeri Streltsov]

Hi

You should update firmware up to 5.2

With multi-service-4 profile I have at now:
===
NetIron MLX LP SL 17:
Total SDRAM         :   536870912 bytes
Available Memory    :   105181184 bytes
Available Memory (%):          19 percent
===

---
Valeri Streltsov
TiERA Broadband
Tel +7 812 6777776
Fax +7 812 6220272

15.12.2011 15:12, Franz Georg Köhler пишет:
> On Mi, Dez 14, 2011 at 10:16:49 +0100, "Rolf Hanßen"<nsp at rhanssen.de>  wrote:
>> Hi,
>>
>> we had a MLX running at 2% free for approx. one year without any issues
>> except Foundry told us there is no way to avoid the error logging.
>> The value did not change during that year while changing amount of active
>> vlans, VEs, IP routes.
>
> Hello,
>
> thank you for that information.
>
> I think I will free up some memory since I would like to get rid of that
> message and just found out that this line card is not able to activate a
> single ACL any more...:
>
> Dec 15 11:41:48:N:Slot 1: ACL low system memory error !
>
> NetIron MLX LP SL 1:
> Total SDRAM         :   536870912 bytes
> Available Memory    :    22589440 bytes
> Available Memory (%):           4 percent
>
>
>>> Are you sure that message reflects TCAM and not general DRAM?
>
> No, this message is not about CAM but total line card memory.
>
>
>
> Best regards,
>
> Franz Georg Köhler
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp