[f-nsp] Current Total Free Memory [...] is below 5 percent of Installed Memory.

[Valeri Streltsov]

Hi

CAM profile are affecting to IPv4, IPv6, ACL(v4&v6), vrf, mpls sizes of 
allocated partitions.

In you case there is no solution to increase amount of partitions 
because "ipv6-ipv6-2" profile.

Try to decrease ACL usage or look for migrating to MLXe modules.

Information about profile differs are located in configuration guide in 
chapter "CAM partition profiles" (from 2622 page in 5.2 manual)

---
Valeri Streltsov
TiERA Broadband
Tel +7 812 6777776
Fax +7 812 6220272

17.12.2011 16:23, Franz Georg Köhler пишет:
> On Fr, Dez 16, 2011 at 10:22:36 +0400, Valeri Streltsov<v.streltsov at tiera.org>  wrote:
>> Hi
>>
>> You should update firmware up to 5.2
>>
>> With multi-service-4 profile I have at now:
>> ===
>> NetIron MLX LP SL 17:
>> Total SDRAM         :   536870912 bytes
>> Available Memory    :   105181184 bytes
>> Available Memory (%):          19 percent
>> ===
>
> Hello,
>
>
> this box is already running 5.2 .
>
> Currently with ipv4-ipv6-2 profile. Unfortunately, I could not find many
> information on how the profiles differ from each other?
> Beside that, are the CAM profiles not only affecting partitioning of the
> CAM memory?
>
>
> Best regards,
>
> Franz Georg Köhler
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp