[f-nsp] Best practise for dual-stack IPv6 on Jetcore-based devices

[Jeroen Wunnink]

That might be the issue then indeed. We have the dual-stack setup 
working with ports on the vlan config and IP's on the ve config. (per 
subnet a seperate vlan on our setup)


On 2/7/11 1:29 PM, Chris Hellkvist wrote:
> Hi Jeroen,
>
> 2011/2/7 Jeroen Wunnink<jeroen at easyhosting.nl>:
>    
>> in global config level do a:
>> ipv6 unicast-routing
>>      
> that's already configured, but it seems like it's not possible to mix
> ip-subnet-vlans with VE-interfaces that are running v4-addresses and
> configuring v6-addreses on the same interface. Mischa's suggestion
> works, but i don't want to put different subnets on the same VE
> interface. I have some other configs with quite a couple of different
> v4-addresses and this would blow up the config for a single VE
> interface...
>
> Chris
>    

-- 

Met vriendelijke groet,

Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
systeembeheer at easyhosting.nl

telefoon:+31 (035) 6285455              Postbus 48
fax: +31 (035) 6838242                  3755 ZG Eemnes

http://www.easyhosting.nl
http://www.easycolocate.nl