[f-nsp] Max BGP peers BigIron RX4

[Pieter Taks]

Hi Maxim,

Thank you for thinking with me. The following modules are in place.

Is there anything I need to replace/add?

sh module
==========================================================================
                    *** BigIron RX-4 CHASSIS ***

        Module                             Status      Ports  Starting MAC
M1 (left): RX-BI-MR2 Management Module (High Value)     Active
M2 (right):
F1: RX-BI-SFM1 Switch Fabric Module         OK
F2: RX-BI-SFM1 Switch Fabric Module         OK
F3: RX-BI-SFM1 Switch Fabric Module         not present
S1: RX-BI-4XG 4-port 10GbE Module  CARD_STATE_UP    4   000c.dbf5.1200
S2:
S3: RX-BI-2XG 2-port 10GbE Module  CARD_STATE_UP    2   000c.dbf5.1200
S4: RX-BI-2XG 2-port 10GbE Module  CARD_STATE_UP    2   000c.dbf5.1200
==========================================================================

Pieter Taks

Verzonden: donderdag 24 februari 2011 7:59

Hi Pieter,

I think it's a limitation of management module - I had the same problem on NetIron: MLX module supports maximum 512 BGP sessions, XMR maximum 1024 sessions.

What management module do you have?

Maxim Tuliuk


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20110225/9445865e/attachment.html>