[f-nsp] Quick Help Turning Up SFP On FESX424

[Jared Valentine]

Make sure you don't have a copper/RJ45 cable plugged into the same port #
where you're plugging the SFP into.  Ports 1-4 are "combo" ports, not
dedicated.  If you use the copper, you can't use the corresponding fiber and
vice-versa.

Jared Valentine
hidden at xmission.com

-----Original Message-----
From: foundry-nsp-bounces at puck.nether.net
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Adam E Barratt
(Sales Engineering)
Sent: Friday, January 14, 2011 8:43 AM
To: foundry-nsp at puck.nether.net
Subject: [f-nsp] Quick Help Turning Up SFP On FESX424

Good morning,

If anyone can shoot me a quick email, I'm onsite trying to turn up some 
non OEM optics on a FESX424.  Is there any config that's needed or 
should it be automatic?

Thanks!
Adam

-- 
Adam E Barratt
Sales Engineer
SOCKET
abarratt at socket.net
1-800-SOCKET-3  www.socket.net
**********************************************************************
Privacy Notice: The information in this message is confidential and may be
legally privileged. It is intended for use only by the individual or entity
to which it is addressed. Access to this message by anyone else is
unauthorized. If you are not the intended recipient, any disclosure,
copying, distribution or any action taken or omitted to be taken in reliance
on it, is prohibited and may be unlawful.  If you have received this e-mail
in error please notify the sender immediately and delete it from your system
without copying or forwarding.
**********************************************************************

_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp