[f-nsp] TE for the same VLL peers

[Mitchell Warden]

That command just drops you into LSP configuration.
It doesn't have any impact on the VLL.

It's the same as if you had typed
router mpls ; lsp ?

Cheers.
Mitchell


----- Original Message -----
From: Matthew Walster
[mailto:matthew at walster.org]
To: foundry-nsp at puck.nether.net
Sent: Thu, 16
Jun 2011 01:07:31 +1000
Subject: Re: [f-nsp] TE for the same VLL peers


> 2011/3/31 Romain DEGEZ <romain.degez at smartjog.com>:
> > Quoting the documentation:
> >
> > Syntax: vll <vll-name> <vll-vc-id> [cos <cos value>] [raw-mode]
> > The <vll-vc-id> corresponds to the user-configurable ID defined in draft
> > ietf-pwe3-control-protocol-14.txt.
> 
> With a bit of discovery with a few colleagues, I've found out there's
> an undocumented option in the "conf t ; router mpls ; vll xyz 1000"
> tree; that is, it's not in the help menu. Try typing "lsp ?" - I
> wonder if anyone's using it in the field and can report if it works
> correctly?
> 
> M
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>