[f-nsp] Fwd: Seeking firmware for Foundry / Brocade FES2402 switch

[lausgans at gmail.com]

Hi! I'm currently seeking a firmware for Foundry
FastIron 2402 (FES2402) switch, non-premium version.
Mine is very old. Here is an output from my device.

BR-SSH at pigiron>sh ver
   SW: Version 03.5.01Tc1 Copyright (c) 1996-2006 Foundry Networks, Inc.
       Compiled on Jun 24 2006 at 21:37:14 labeled as FEL03501
       (2732353 bytes) from Secondary fel03501.bin
       Boot Monitor: Version 03.5.00Tc4
   HW: Stackable FES2402
==========================================================================
       Serial #: FWXXXXXXXX
   330 MHz Power PC processor 8245 (version 129/1014) 66 MHz bus
   512 KB boot flash memory
16384 KB code flash memory
   128 MB DRAM
The system uptime is 6 days 1 hours 32 minutes 7 seconds
The system started at 08:45:09 GMT+03 Wed Feb 23 2011

The system : started=cold start

BR-SSH at pigiron>sh flash
Compressed Pri Code size = 2207650, Version 03.5.01Tc1 (fes03501.bin)
Compressed Sec Code size = 2732353, Version 03.5.01Tc1 (fel03501.bin)
Compressed Boot-Monitor Image size = 49021, Version 03.5.00Tc4
Compressed Boot-Tftp Code size = 184111, Version 03.5.00Tc5
Default BootROM Contents Info:
    Boot Loader Rev: 1a
    Monitor Image Version: 03.01.02Tc4
    Boot-Tftp Image Version: 03.01.02Tc5
Code Flash Free Space = 11337728

Can anybody share/sell most recent firmware for my device? Because i'm
ready to buy support contract from Brocade just to support single EOL
device.
Since many of you can have contract that allows access to KP Foundry
portal (legacy IP products), i hope someone can help me.

P.S.: The latest firmware at the 11/2010 was a FES 04.1.01c (i.e.
FES04101c) according to information that i got from Brocade support.

Thanks!